|
|
Build Your Online Product Catalogs?
CRI-200 test bench is the special device to test the performance of high-pressure common rail injector assembly, it adopts BOSCH original common rail pump to provide 0~2000 bar of rail pressure, it can test common rail injector of main producers(BOSCH¡¢SIEMENS¡¢DELPHI¡¢DENSO).
>>>CHARACTERISTIC
1. Main motor drive adopts the frequency change to adjust the speed.
2. It is installed BOSCH original common rail pump to provide 0~2000 bar of rail pressure.
3. The drive signal can be adjusted.
4. Protection function of short-circuit.
5. The rail pressure can be tested in real time, it contains the high-pressure protection function.
6. Pulse and frequency of the injector drive signal can be adjusted.
7. The injection time can be setted.
8¡¢dimension£¨MM£©£º1200¡Á800¡Á1600;
9¡¢weight£º400KG.
>>>FUNCTION
1. Test the max. oil quantity of high-pressure common rail injector.
2. Test the cranking oil quantity of high-pressure common rail injector.
3. Test the backflow oil quantity of high-pressure common rail injector.
4. Test the average oil quantity of high-pressure common rail injector.
5. Set the high-pressure common rail injector' injection state and oil quantity measurement.
>>>Technical Parameter
1. Test frequency of injector: 50-3000rpm;
2. Pulse width: 0.1-200ms;
3.Test injection time: 1-300s;
4.Rail pressure: 0-200***;
5.Graduate: 120ML;
6.Input power: AC 380V/50HZ/3Phase or 220V/60HZ/3Phase or on request;
7.Fuel temperatue: 40℃;
8.Overall dimension: 1200MM¡Á800MM¡Á1600MM;
9.Weight: 400KG. |
| Company: |
Tai'an Chen Lin Electromechanical Equipment Co. Ltd
|
| Contact: |
Mr. bangtao LI |
| Address: |
xiaojing |
| Postcode: |
271000 |
| Tel: |
86 538 6292205 |
| Fax: |
86 538 6292205 |
| E-mail: |
|
|
|
|
Home
